Metal Working Fluid » Metal Drawing Oil / Drawing Lubricants / Drawing Oil

Metal Drawing Oil 15 (GRADES : VG 320)

Introduction / Specification :
Metal Drawing Oil 15 is manufactured from highly refined base stocks and specially selected additives to impart high wetting and excellent EP properties with good metal deactivation, anti-rust and anti-wear properties. This product has excellent load carrying ability which is encountered in metal drawing and is capable of stopping any wire leakage even with high speed drawing.

Application / Composition :
Metal Drawing Oil 15 is suitable for metal wire drawing operation of ferrous and other alloys of ferrous even with high speed.


Performance Level :
Metal Drawing Oil 15 is a proprietary product.

Typical Properties :
CHARACTERISTICS Metal Drawing Oil 15
300
Kinematic Viscosity at 40°C, cSt
Flash Point,°C, COC, Min. 250
Copper Strip Corrosion for 3 Hrs at 100°C. 1
Saponification No., mg KOH / gm. 20

Packing of Metal Drawing Oil 15 : 210 Litres Drums.
Date of issue:01.07.2009
PDS No. 50900


Metal Drawing Oil / Drawing Lubricants 15AL (GRADES : 32, 68, 100 & 220)

Introduction / Specification :
Metal Drawing Oil 15 AL is manufactured from highly refined base stocks and specially selected additives to impart high wetting and excellent EP properties with good metal deactivation, anti–rust and anti–wear properties. This product has excellent load carrying ability which is encountered in metal drawing and is capable of stopping any wire leakage even with high speed drawing.

Application / Composition :
Metal Drawing Oil 15 AL / Deep draw Oilis suitable for metal wire drawing operation of aluminum and other aluminum alloys even with high speed.


Performance Level :
Metal Drawing Oil 15 AL is a proprietary product.

Typical Properties :
CHARACTERISTICS Metal Drawing Oil 15 AL
300
Kinematic Viscosity at 40°C, cSt
Flash Point,°C, COC, Min. 250
Copper Strip Corrosion for 3 Hrs at 100°C. 1
Saponification No., mg KOH / gm. 20

Packing : 210 Litres Drum.
Date of issue:01.07.2009
PDS No. 50901


Metal Working Fluid » Metal Drawing Compound / Drawing Lubricants
Introduction / Specification :
Drawing lubricants is an invert emulsion that thickens while water is added. The viscosity changes from thin to thick which makes it an ideal drawing lubricants. Drawing lubricants / Deep draw Oil product was approved by General Motors in 1979. Metal Mates 123 Drawing Lubricants is easily cleaned and is weldable. This emulsifiable product was approved by GM and lent itself to cleaner parts, dies and improved housekeeping. Drawing Lubricants product contains no chlorine, pigments, or waxes.







Grades EASTTO METAL DRAWING OIL 15, 15AL, 44

Introduction / Specification :
EASTTO METAL DRAWING OIL 15 is premium grade high performance metal drawing oil which contains synthetic additives to improve lubricating film strength and provides outstanding extreme pressure and anti-wear properties. It is developed for the metal drawing process which includes operations like Pressing, Stamping, Deep Drawing and Tube Drawing.


Application / Composition :
It is recommended is recommended for ferrous and non ferrous metals. It is suitable for the all types of wire drawing and deep drawing operations and also used for all application devices such as spraying or rolling.


Benefits :
Improved cooling property
High drawing efficiency with good anti-wear properties.
It provides excellent lubricity
Good surface finish.
High oxidation stability




EASTTO METAL DRAWING 15AL

Introduction / Specification :
It is Aluminium wire drawing lubricants formulated with non staining extreme pressure and synthetic lubricity additives. It provides an excellent lubricity, high cooling ability and easy separation of fines. Due to its lubricity effectiveness, amount of heat formation from friction decreases significantly. Mechanical properties of the manufactured wire meet the proposed requirements by using this oil. At proper drawing efficiency it makes wire surface homogeneous, bright and free of scratches. This is neat oil for drawing of pure aluminium and its alloys.
Application / Composition :
It is recommended for wire drawing of Aluminium and its alloys.


Benefits :
Provides optimum boundary lubrication to protect dies and provide outstanding surface finish on drawn wire.
Excellent resistance to thermal degradation
Able to absorb some moisture without compromising lubrication performance.
Maximise performance, delivering significant cost savings.




EASTTO METAL DRAWING 44

Introduction / Specification :
It is water soluble paste formulated for the wet drawing of all grades of steel wire. The unique combination of fatty acids, vegetable oil and a non-corrosive, extreme pressure additive produces a solution that exhibits the cleanliness and stability associated with synthetics, while affording the slip and lubrication properties generated by natural soaps. EASTTO METAL DRAWING 44 dissolved in water at rates ranging from 4 to 10% to carry out severe wire drawing operations.
Application / Composition :
It is mainly used for drawing of steel wires. This product can also be used for wet drawing of iron, galvanized steel wires, staple wire and copper plated wire.


Benefits :
Provides excellent protection of dies and punches against corrosion
It is a versatile product, the rates of which can be adjusted in accordance with the drawing difficulties likely to be encountered
Can be easily removed by means of cleaning and washing systems.
Extra ordinary film resistance. It allows to carry out difficult drawings operations. It does not attack the bronze element of dies and punches




Metal Working Fluid ›› Metal Drawing Oil / Drawing Lubricants / Drawing Oil is Used / Needs in Machine Tool Industries Applications / Uses as below :

Metal drawing lubricants are mostly used in as - metal drawing lubricants, metal drawing oil, drawing oil, drawing lubricants, wire drawing lubricants, aluminium wire drawing, aluminium wires, tube drawing, forging process, pressing, stamping, DIP drawing, cold rolling oils, hot rolling oils, copper rolling oils, copper rolling lubricants, rolling fluids, Wire Drawing, Aluminum and its alloys, Wire leakage, Effective coolant, Wire drawing operations, Automotive bodies, Metal sheets, Tube drawing, Forming, Spinning, Stamping operations, Wire Drawing, Aluminum and its alloys, Wire leakage, Effective coolant, Automotive bodies, Metal sheets, Tube drawing, Forming, Spinning.

Manufacturers, Exporters and Suppliers of Metal Drawing Oil, Drawing Lubricants, Drawing Oil from INDIA.

Our Quality prices products are being used in various countries like i.e. India, Srilanka, Bangladesh, Italy, New Zealand, France, Mauritius,Switzerland, Pakistan, Nepal, Myanmar, Vietnam, Thailand, Malaysia, Singapore, Philippines, Middle East Countries - UAE, Saudi Arabia, Qatar, Oman, Iran, Iraq, Kuwait, African countries i.e. Nigeria, Ethiopia, Egypt, Uganda, Mozambique, Namibia, South Africa and western countries like UK, Brazil, USA, Argentina & More...

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.