Industrial Grease » High Temperature Grease

GRADES : HITEMP & HITEMP EXTRA

Packing :

182 Kgs.Drums
Date of issue :01.07.2009
PDS No : 60530 -60531

Introduction / Specification of High Temperature Grease :

These are non-soap base smooth structured grease for high temperature grease operating conditions under severe shock load conditions. High temperature grease are water resistant and are not affected by acids / alkalis. They have high mechanical stability for long life and protection against rust. High Temperature Grease Extra contains molybdenum disulphide for extra load.

Application / Composition of High Temperature Grease :

High Temperature Grease is recommended for plain bearings, anti – friction bearings operating at high temperature (120°C to 250°C). High Temperature Grease is recommended for highly loaded machinery operating at above high temperatures.

Performance Level of High Temperature Grease :

High Temperature Grease & High Temperature Extra
Grease meet IS 12790: 1990.

Typical Properties of High Temperature Grease :

CHARACTERISTICS High Temperature Grease
HITEMP HITEMP EXTRA
Colour Brown Greenish Black
Work Penetration at 25°C 265-295 265 to 295
Drop Point °C, Min. Above 280 Above 280
Copper Corrosion Test at 100°C for 3 hours. Passes Passes

We have surplus capacity to produce lubricant and this extra capacity can be used to cater other parties to manufacture/filling their brand of product by way of toll blending.

We are leading in:

Best quality High Temperature Grease, High grade High Temperature Grease, leading manufacturers of High Temperature Grease, leading suppliers of High Temperature Grease, leading exporters of High Temperature Grease.

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.