Industry Specialty Oil » Formwork Oil
Formwork Oil (GRADES: 5 and 22)
Packing :
210 Litres Drum.
Date Of Issue: 01.09.2009
PDS no. 30251 - 30252
Introduction / Specification :
Formwork Oil (GRADES: 5 and 22) are high quality mineral oil based mould releasing oil with low odour as multi-purpose mould releasing agents for metallic and wooden moulds in concrete construction works. Formwork Oil form / Formwork Oil / Concrete Formwork Oil a tenacious oily film on the mould surface that prevents rusting of mould and the release agents prevent concrete clinging to the moulds with a high quality surface finish. The oil do not cause stain or discolouration, interfere with drying process and is also not absorbed by the concrete
Application / Composition :
Formwork Oil (GRADES: 5 and 22) are used straight from the drum and no stirring or mixing is required. Formwork Oil are applied by spraying guns, rollers or by brushes prior to pouring aerated concrete and are recommended for use as a concrete mould release agent with the protection of moulds from rust.
Typical Properties :| CHARACTERISTICS | Formwork Oil/ Form Oil / Concrete Formwork Oil | |
| 5 | 22 | |
| Kinematic Viscosity at 40ºC., cSt, | 4.5 to 5.5 | 20.0 to 24.0 |
| Colour, ASTM, Max. | 3.0 | 3.0 |
| Flash Point, ºC, Min. | 120 | 160 |
| Pour Point, °C. Max. | -3 | -3 |
Highly Suitable for "MIVAN" Technology.
We are leading in:Best quality Formwork oil, High grade Formwork oil, leading manufacturers of Formwork oil, leading suppliers of Formwork oil, leading exporters of Formwork oil.
Manufacturers, exporters, and suppliers of Formwork oil from India in the middle east countries i.e. Egypt, Iran, Iraq, Israel, Kuwait, Morocco, Oman, Qatar, Saudi Arabia, Turkey, United Arab Emirates; African countries i.e. Egypt, Nigeria, South Africa, Ethiopia, Kenya, Ghana; Far East Asian countries Mongolia, Korea, Thailand, Philippines, Malaysia, Myanmar also in Southeast Asia, North America, Europe and Australia, USA, Canada.
DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.