Automotive Oil » 2T Engine Oil
GRADES: 2 STROKE ENGINE OIL
Introduction / Specification of 2T Engine Oil:
2T Engine Oil is low smoke semi-synthetic two stroke engine oil developed to meet the critical requirements of 2 stroke engines manufactured by all leading auto makers. It is blended from selected virgin base stocks and special prooven additives to minimise spark plug fouling and pre - ignition, prevent rusting, minimise deposit formation and provide protection against seizure, scuffing and wear. It is specifically formulated to give additional advantage of lower consumption of fuel. It contains a diluent for easy mixing with gasoline and is dyed green for easy identification.
Application / Composition of 2T Engine Oil:
2T Engine Oil is recommended for lubrication of scooters, autorickshaws, motorcycles and mopeds operating on two stroke engines. The recommended dosage is 20 ml of oil per litre of petrol.
Performance Level of 2T Engine Oil: 2T Engine Oil meets the performance level of JASO FC specifications.
Typical Properties of 2T Engine Oil:
|CHARACTERISTICS||2T Oil 100|
|Kinematic Viscosity at 40°C., cSt,||50.0 to 60.0|
|Flash Point, COC, ºC. Min.||200|
|Sulphated Ash, % by Weight, Max.||0.25|
|Pour Point, °C. Max.||(-) 12|
Packing of 2T Oil: 210 Litres Drum, 50 Litres, 20 Litres, 5 Litres, 1 Litre.
Date of Issue : 01.09.2009
Manufacturers, Exporters and Suppliers of 2T Engine Oil from INDIA.
Our Quality prices products are being used in various countries like i.e. India, Srilanka, Bangladesh, Italy, New Zealand, France, Mauritius,Switzerland, Pakistan, Nepal, Myanmar, Vietnam, Thailand, Malaysia, Singapore, Philippines, Middle East Countries - UAE cities as SHarjah, Dubai, Abu Dhabi, Saudi Arabia, Qatar - Doha, Oman - Muscat, Iran, Iraq, Kuwait, Jordan, Egypt, African countries i.e. Nigeria, Ethiopia, Egypt, Uganda, Mozambique, Namibia, South Africa and western countries like UK, Brazil, USA, Argentina & More...
2T Engine Oil mostly used and applicable in barrels in various maintenance work shops in garages area and in Fuel injection workshops or fuel injection industries and workshops across thousands of city shops in States of India
We have surplus capacity to produce lubricant and this extra capacity can be used to cater other parties to manufacture/filling their brand of product by way of toll blending.DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.